struct

`SushiDSP::LongTailedPairHalf`

One half's own plate load, headroom and grid drive.

Declared in: include/SushiDSP/circuits/stages/LongTailedPair.hpp

The two halves carry different plate loads in most amplifiers, which is how the pair's two outputs come out matched in amplitude despite the tail's asymmetry, and different grid leaks, because one grid is driven from the preamplifier and the other from the feedback leg.

Public attributes

float plate_load_ohms

The plate resistor this half works into.

float source_resistance_ohms

Thevenin resistance feeding this half's grid.

float grid_leak_resistance_ohms

The leak pulling this grid toward the bias point.

PlateSwing plate_swing

The two headrooms bounding this half's plate.